SETUP & USAGE GUIDE

Teeny Traveler™ - Diaper Bag

 

 

 

 

 

 

First-Time Setup Instructions for the Daybed

Installing the support rods into the Daybed is simple and straightforward:

1. Open the Daybed by unzipping the Daybed section. Locate the designated slots for the support rods.

2. Insert the Foldable Support Rods into the side slots, with the shorter end first. Then push the back ends of the Support Rods into the locking slots to secure them in place.

3. Once both rods are securely installed, set up the bed, and ensure the bed is stable before use.

4. To fold the Daybed, you can either:

   a. Simply Remove the Support Rods from the installation slots on both sides of the bag, and place the rods into the storage bag.

   b. Simply release the back ends of the Support Rods from the locking slots, then pull the back ends to Fold the Rods. The Support Rods do not need to be removed from the slots; simply fold them together into an "X" shape and fold the Daybed with the rods in place.

5. Fold the daybed neatly and pull both ends of the diaper bag together.

6. Locate the zipper slider and press it firmly against the zipper base. Insert the zipper head fully into the base, then close the zipper.